MINI COOPER KEY INITIALIZATION 钥匙初始化

The initialization procedure allocates the key transmitter to the general module. During initialization, a code is generated in the key transmitter and then transferred to the general module. The code is stored in the key transmitter and in the general module. The general module recognizes the keys belonging to the system on the basis of this code. Only commands from these keys are then carried out.

A maximum of 4 keys can be initialized for each vehicle. The codes of all other keys are deleted when a key is reinitialized. This means that all the keys of a system must be initialized simultaneously.


Sequence of the initialization
Carry out key transmitter initialization in the vehicle interior.

•Unlock vehicle via central locking and close driver's and passenger's doors.

•Briefly switch on terminal R in vehicle (maximum 5 seconds) and switch off again. => The system is now ready to be initialized.

•Press and hold ”unlock” button on the key transmitter.

•Point key transmitter in direction of antenna and, with the ”unlock” button pressed, press ”lock” button three times within 10 seconds. => A new code is generated in the key.

•Release both buttons. => The general module signals that initialization of the key was successful by locking and unlocking the central locking system.

Repeat the procedure as of Point 3 (= press and hold ”unlock” button on key transmitter) to initialize the other keys. Terminal R must not be varied during this procedure.

The initialization procedure is terminated if terminal R is switched on.

初始化设置的步骤
遥控钥匙的初始化设置在汽车内进行。

•通过中控锁解除车辆的上锁，并关闭驾驶员车门和前座乘客侧车门。

•在车内短时 (最多 5 秒钟) 接通和断开总线端 Kl. R。=> 系统准备进行初始化设置。

•按下并按住遥控钥匙上的按钮 ”解锁”。

•钥匙保持朝向后窗天线方向，在按住按钮 ”解锁” 的同时，10 秒钟内按动按钮 ”上锁” 三次。=> 在钥匙内产生一个新的代码。

•放开两个按钮。=> 基本模块 (GM) 通过中控锁的联锁和解除联锁发出信号，表明钥匙初始化设置已成功进行。

对其他钥匙进行初始化设置时，应从第 3 点开始重复此后步骤 (= 按下并按住钥匙上的按钮 ”解锁”)。不允许改变总线端 Kl. R。

接通总线端 Kl. R 会中断初始化设置。

提示

遥控钥匙中的存储器与电压无关，这样可确保，即使在电池耗尽的情况下初始化设置数据也不会丢失。